Special GEARWRENCH 1/2inch Drive Micrometer Torque Wrench 30-250 ft/lbs 85066M

The GEARWRENCH family of torque wrenches & torque products offer the latest innovations in torque measurement. Included in the line are micrometer, tire shop, beam and electronic torque wrenches, as well as, torque multipliers. The micrometer wrenches are available in fixed head and flex head. The fixed head line offers wrenches in 1/4″ to 3/4″ drives. The flex head wrenches are available in 3/8″ and 1/2″ drives. The tire shop wrenches feature a rugged tire tread rubber cover on the head intended to specifically be used for checking wheel lug nuts and are available in 3/8″ and 1/2″ drives. The electronic torque wrenches ensure a more precise fastener torque level and are available in a 3/8″ and 1/2″ drives. The GEARWRENCH line of torque products allow the user to complete any job where accurate torque is required.

• 120XP™ head provides a 3° ratcheting arc to turn fasteners in narrow spaces
• Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines
• Digitally tracks torque and angle measurements. Vibrating handle, buzzer, and LCD screen alert when target torque is reached
• 3 function modes feature peak torque, angle, and peak angle for additional versatility
• 5 torque measurement units provide a readout in ftlb, inlb, Nm, Kgm, and Kgcm
• 10 available preset torque settings allow you to quickly access frequently repeated applications
• Torque accuracy of +/% CW and +/% CCW between 20% and 100% of wrench capability Angle settings offer +/% of reading of angle accuracy
• Knurled aluminum handle lets you grip comfortably, while clearly marked midpoint promotes additional accuracy
• Meets or exceeds ASME standards and specifications
• 1 year limited warranty; calibration accuracy warrantied for 90 days

Specifications

• Drive Size: 1/2″ Drive
• Ratcheting Tooth count: 120 XP Tooth
• Ratchet Drive ASME Spec: ASME B107.10
• Flex Head: 15 Degrees
• Modes: Peak Torque, Peak Angle, Angle Mode
• Torque Measurements: FTLb, UnLb, NM, KGCm, KGM
• Torque Range
  • FtLb: 25 250 FtLb
  • InLb: 301 3010 InLb
  • Nm: 34 340 Nm
  • KgCm: 350 3500 KgCm
  • KgM: 3.5 35 KgM
• Scale Increments
  • FtLb: 0.1 FtLb
  • InLb: 1 InLb
  • Nm: 0.1Nm
  • KgCm: 1 KgCm
  • KgM: 0.01 KgM
• Torque Accuracy: 100%of Scale 2% CW, 3%CCW
• Operating Load Markings ASME Spec: Center Line for load postion marked on both sides of handle grip
• Angle range: Degrees
• Angle Display Increments: 1 Degree
• Angle Accuracy: (+/% of reading) + (+/ 1 degree @angular velocity > 10 degree/sec <180 degree/sec) + (+/ degree of test fixtrure)
• Calibration and Cycle Life Testing meet/exceed ASME: Meets or Exceeds ASME B107.calibration and cycle test requirements
• Preset Torque Measurements: 10
• Target Torque Alert: Target Torque Alert default setting 10% before Target
• Peak Mode: Yes
• Angle Mode: Yes
• Goal warning: Tone, Vibrating handle, Screen changes green/red
• Water Resistance: Splash Proof
• Solvent Resisitance: Meets ASME B107.12 brake fluid, gasoline, ethylene glycol, ethyl alcholol
• Batteries: 2 x AA
• Battery Life: Exceeds ASME spec B107.28. Length of time will operate on 2 x AA batteries actual over 20 hours
• Packaging: Blow mold case with clasp
• Instruction Manual: Instruction manual Tri lingual
• Calibration Certificate: Calibration Certificate Tri lingual
• Prop 65 Meets Prop 65 Requirements
• FCC regulations for Digital Devices: Meets FCC regulations for digital devices
• Product Markings: Torque range and serial number laser etched on beam as req. by ASME B107.28