Special MAKITA 18V Brushless 3 Piece 2 x 5.0Ah Combo Kit DLX3169TX1-B

The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavyduty applications.

Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

• Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
• 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
• LED Joblight – high brightness twin LED joblight with preglow and after glow functions. Illuminating the working area for greater visibility during application
• High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavyduty applications.
• 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
• All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
• XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability

Specifications

• Max. drilling capacities in wood:
  • Auger bit: 50mm
  • Selffeeding bit: 76mm
  • Hole saw: 152mm
• Max. drilling capacities in steel: 13mm
• Max. drilling capacities in masonry: 16mm
• No load speed:
  • Hi: 0 2,100rpm
  • Lo: 0 550rpm
• Impact rate:
  • Hi: 0 31,500ipm
  • Lo: 0 8,250ipm
• Max. peak torque: 141Nm
• Max. tightening torque:
  • Hard: 130Nm
  • Soft: 65Nm

*Battery and charger not included

The Makita DTD154Z Brushless Impact Driver has a high rotational speed of 3,600rpm, which is optimum for fast tightening of selfdrilling screws. Featuring an aluminium hammer case, variable speed control and onetouch bit installation, this is a powerful and compact drill to suit any line of work. It also features electronic stage impact power selection and the new TMode especially for tightening selfdrilling screws.

• Aluminium hammer case
• Onetouch bit installation, no need to pull bit sleeve for bit installation
• Twin LED job light with preglow and afterglow functions
• High rotation speed at 3600rpm
• Variable speed controlled by trigger
• Ergonomically designed handle with soft grip provides comfortable grip and more control while minimising hand fatigue and pain
• Electronic stage impact power selection in order to reduce fault tightening, hard/medium/soft impact power can be selected to the material of workpiece or screw type simply by pushing a button
• TMode is a special mode optimum for fast tightening of self drilling screws without damaging the screw and workpiece

Specifications:

• Voltage: 18V
• Capacity:
• Machine screw: M4 M8
• Standard bolt: M5 M16
• High strength bolt: M5 M14
• Coarse thread (length): 22mm 125mm
• Impacts per minute:
• Speed 1: 0 3800ipm
• Speed 2: 0 2600ipm
• Speed 3: 0 1100ipm
• No load speed:
• Speed 1: 0 3600rpm
• Speed 2: 0 2100rpm
• Speed 3: 0 1100rpm
• Max fastening torque: 175Nm
• Vibration level: 12.5m/s²
• Sound pressure level: 96dB(A)
• Sound power level: 107dB(A)
• Dimensions (L x W x H): 117mm x 79mm x 236mm
• Weight: 1.2kg

• Kickback detection, antirestart, and soft start
• Automatic Torque Drive increases torque to power through any cut
• Extreme performance with 8,500rpm no load speed
• XPT technology that protects against dust & moisture
• Electronic current limiter
• Easy to hold grip design with rubber for antiskid
• World’s deepest concrete cutting mobile angle grinder at a depth of 20mm
• Excellent performance as powerful as AC model
• Gear housing can be rotated to suit most cutting and grinding applications
• Automatic speed control changes the cutting speed according to load condition for an optimum operation
• Antirestart function prevents accidental startup for safety even if the machine is plugged into a power source with the lockon switch on